The Alkylquinolone Repertoire of Pseudomonas aeruginosa is Linked to Structural Flexibility of the FabH‐like 2‐Heptyl‐3‐hydroxy‐4(1H)‐quinolone (PQS) Biosynthesis Enzyme PqsBC

Pseudomonas aeruginosa is a bacterial pathogen that causes life‐threatening infections in immunocompromised patients. It produces a large armory of saturated and mono‐unsaturated 2‐alkyl‐4(1H)‐quinolones (AQs) and AQ N‐oxides (AQNOs) that serve as signaling molecules to control the production of virulence factors and that are involved in membrane vesicle formation and iron chelation; furthermore, they also have, for example, antibiotic properties. It has been shown that the β‐ketoacyl‐acyl‐carrier protein synthase III (FabH)‐like heterodimeric enzyme PqsBC catalyzes the last step in the biosynthesis of the most abundant AQ congener, 2‐heptyl‐4(1H)‐quinolone (HHQ), by condensing octanoyl‐coenzyme A (CoA) with 2‐aminobenzoylacetate (2‐ABA), but the basis for the large number of other AQs/AQNOs produced by P. aeruginosa is not known. Here, we demonstrate that PqsBC uses different medium‐chain acyl‐CoAs to produce various saturated AQs/AQNOs and that it also biosynthesizes mono‐unsaturated congeners. Further, we determined the structures of PqsBC in four different crystal forms at 1.5 to 2.7 Å resolution. Together with a previous report, the data reveal that PqsBC adopts open, intermediate, and closed conformations that alter the shape of the acyl‐binding cavity and explain the promiscuity of PqsBC. The different conformations also allow us to propose a model for structural transitions that accompany the catalytic cycle of PqsBC that might have broader implications for other FabH‐enzymes, for which such structural transitions have been postulated but have never been observed.     

All the players in the game: driving home the global commitment for legitimate drugs

Substandard, falsified, and counterfeit medications are a concern for the industry and for the public’s health. Data collection and research on these illegitimate drugs must continue to be a priority and common recommendations must be implemented immediately. The health of the public continues to be at risk, and as such global consensus and collaboration must be swift. Process improvements and policy decisions can support expert recommendations while technology and research continue to drive home change. Addressing counterfeit and substandard drugs is cost effective, feasible, and the right thing to do.     

Test sample allocation method for testability verification test

An extended failure mode effect and criticality analysis (FMECA)-based sample allocation method for testability verification is presented in this study to deal with the poor representativeness of test sample sets and the randomness of the testability evaluation results caused by unreasonable selection of failure samples. First, the fault propagation intensity is introduced as part of the extended information of FMECA, and the sample allocation impact factors of component units and failure modes are determined under this framework. Then, the failure mode similarity and impact factor support are defined, and the game decision method for weighing the relationship between similarity and support is proposed to obtain the weight of failure mode impact factor. Finally, a two-step allocation framework of test samples is formulated to realize the sample allocation of component units and failure modes. This method is applied to the testability verification test of a launch control system. Results show that this method can obtain more representative test samples compared with the traditional sample allocation method while effectively reducing randomness of single testability evaluation result.     

Structural and physicochemical properties of silver-rich Ag–Al alloys

The X-ray diffraction, Scanning Electron Microscopy, Differential Scanning Calorimetry, dilatometric and electrical conductivity measurements were used to study the structural and physicochemical properties of selected silver-rich alloys from Ag–Al system. All the studied alloys, containing from 10 to 37 at. % of Al (Ag₉₀Al₁₀, Ag₈₅Al₁₅, Ag₇₇Al₂₃, Ag₇₅Al₂₅, Ag₇₂Al₂₈, Ag₇₀Al₃₀, Ag₆₃Al₃₇), were prepared from high purity metals by melting in a glove-box filled with a high purity argon atmosphere. The obtained X-ray diffraction patterns and microstructure observation of alloys containing up to 15 at. % of Al suggested that in this range only solid solution of silver exists. The thermal analysis showed heat effects related to phase transitions in Ag–Al system. In addition, the thermal expansion studies revealed an anomalous behavior in expansion for some composition of alloys associated with the phase transition. The electrical conductivity values rapidly changed, which may be associated with the formation of different phase areas in the Ag–Al system.Based on the results obtained in this work and critically reviewed literature data a thermodynamic re-optimization of the binary Ag–Al system using CALPHAD method was proposed. A good agreement between calculation and experiment was found.     

大口径光学元件装夹转运结构设计及分析

为了实现大口径光学元件的安全装夹、转运,通过光学元件开槽与不开槽两种装夹方式的分析,得出开槽夹紧转运方式将带来微裂纹、应力集中、成本高等缺陷,提出了利用摩擦力克服光学零件的重力和惯性力的低应力装夹转运方案。通过对光学元件低应力夹紧结构设计,并利用有限元分析方法,得到不开槽装夹方式下,光学元件的最大主应力为1.11 MPa,最大切应力为0.73 MPa,远低于光学元件破坏的强度极限,且受力均匀,无应力集中现象。     

埋地管道腐蚀防护--防腐层与阴极保护存在的问题分析

在埋地管道研究工作中,关于其腐蚀的防护一直是研究的焦点问题,但现阶段常用的防护手段多为防腐层与阴极防护。为此,在文中主要对二者的保护措施展开了相应地阐述,并重点分析了2种保护手段存在的问题,旨在为后续的管道防腐研究提供相应的参考。     

红色红曲菌组蛋白去乙酰化酶MrSir2的原核表达及活性分析

根据基因组序列信息,利用cDNA末端快速扩增技术(rapid-amplification of cDNA ends,RACE)得到了红色红曲菌中组蛋白去乙酰化酶mrsir2基因的完整cDNA序列,其编码序列(coding sequence,CDS)为1539 bp,编码512个氨基酸,含有一个SIR2蛋白保守结构域。根据大肠杆菌的密码子的偏好性对mrsir2序列进行优化,优化后的序列与p ET-28b载体连接后转入宿主菌E.coli BL21中进行IPTG诱导表达,并优化表达条件。实验结果表明:在16℃条件下用终浓度为0.25 mM的IPTG诱导培养16 h后,目的蛋白Mr Sir2可溶性表达效果良好。Ni2+柱亲和层析纯化后的Mr Sir2重组蛋白在SDS-PAGE上显示为一条约75 ku大小的条带,蛋白定量浓度达1.97 mg/mL,经Western blot鉴定为目的蛋白,测定酶活为78.5(OD/min/mg),780μM的二氢香豆素(dihydrocoumarin,DHC)对Mr Sir2蛋白的酶活抑制率为47%。Mr Sir2蛋白的可溶性表达为全面了解其酶学特征提供了材料,也为体外分析蛋白相互作用奠定了基础。     

Bacteriophages vB_Sen-TO17 and vB_Sen-E22, Newly Isolated Viruses from Chicken Feces,Specific for Several Salmonella enterica Strains

Two newly discovered bacteriophages, isolated from chicken feces and infecting Salmonella enterica strains, are described in this report. These phages have been named vB_Sen-TO17 and vB_Sen-E22, and we present their molecular and functional characterization. Both studied viruses are able to infect several S. enterica strains and develop lytically, but their specific host ranges differ significantly. Electron microscopic analyses of virions have been performed, and full genome sequences were determined and characterized, along with molecular phylogenetic studies. Genomes of vB_Sen-TO17 (ds DNA of 41,658 bp) and vB_Sen-E22 (dsDNA of 108,987 bp) are devoid of homologs of any known or putative gene coding for toxins or any other proteins potentially deleterious for eukaryotic cells. Both phages adsorbed efficiently (>95% adsorbed virions) within 10 min at 42 °C (resembling chicken body temperature) on cells of most tested host strains. Kinetics of lytic development of vB_Sen-TO17 and vB_Sen-E22, determined in one-step growth experiments, indicated that development is complete within 30–40 min at 42 °C, whereas burst sizes vary from 9 to 79 progeny phages per cell for vB_Sen-TO17 and from 18 to 64 for vB_Sen-E22, depending on the host strain. Virions of both phages were relatively stable (from several percent to almost 100% survivability) under various conditions, including acidic and alkaline pH values (from 3 to 12), temperatures from −80 °C to 60 °C, 70% ethanol, chloroform, and 10% DMSO. These characteristics of vB_Sen-TO17 and vB_Sen-E22 indicate that these phages might be considered in further studies on phage therapy, particularly in attempts to eliminate S. enterica from chicken intestine.     

焊丝中Si元素含量对铝合金接头裂纹敏感性的影响规律及机理

使用扫描电镜、能谱、温度场实时采集等测试方法，研究了焊丝中Si含量对AA6063铝合金GMAW焊接头热裂纹敏感性的影响规律及机理. 结果表明，当焊丝为纯铝时，鱼骨试样的焊缝中心会出现细长的焊接裂纹；当焊丝中的Si含量为4.5% ~ 6%时，裂纹的长度变短，但是开裂距离明显增加；当焊丝中的Si含量达到11% ~ 13%时，试样焊缝无裂纹出现. 随着Si含量的不断提高，合金易出现裂纹的凝固温度区间先增大后减小；焊丝中Si含量的不同还会影响凝固后期金属液的流动性，使得焊缝晶界处的物相成分和形态都有明显的区别；同时，Si含量的提高会使得接头的冷却速度先增加后减小，从而导致应力状态改变，热裂纹敏感性先升高后降低.